高 伟 教授
高伟，工学博士，教授，博士/硕士研究生导师。现担任中国颗粒学会青年理事、中国颗粒学会颗粒计算专委会委员，主持完成国家自然科学基金面上项目、国家自然科学基金青年基金、省教育厅优秀青年项目等，以第一作者或通讯作者在《Computer Methods in Applied Mechanics and Engineering》、《Composite Structure》、《Computers and Geotechnics》、《Rock Mechanics and Rock Engineering》、《Computational Mechanics》等著名期刊发表SCI检索论文30余篇（其中中科院TOP期刊论文10余篇），获发明专利授权4件。作为核心成员，开发了离散元/有限元耦合软件、移动粒子半隐式法/等几何耦合软件。因卓越贡献，荣获校级“优秀共产党员”称号，并连续四年获学院“优秀创新成果奖”。
兼任《Materials》等SCI期刊Guest Editor及Topical Advisory Panel Member。现任《机械科学与技术》、《广东工业大学学报》及《现代农业设备》等期刊青年编委，并担任《Journal of Rock Mechanics and Geotechnical Engineering》、《Thin-walled structures》、《Engineering Fracture Mechanics》、《Materials and Design》、《International Journal of Mining Science and Technology》、《Structures》、《Journal of building engineering》等SCI期刊审稿专家。
研究方向
机械与汽车结构设计与CAE分析、汽车被动安全与头颈损伤研究、DEM/FEM耦合、流固耦合、芯片封装工艺模拟、脆性材料断裂、散体材料、人工智能与机器视觉（校外合作）
学习、工作经历
2017.10 – 至今 广东工业大学，车辆工程，副教授、教授、硕士/博士研究生导师
2019.09 - 2020.09 东京大学，工学院，访问学者，合作教授Koshizuka Seiichi
2013.07 - 2017.10 湘潭大学，机械工程，讲师、副教授、硕士研究生导师
2008.09 - 2013.06 华南理工大学，车辆工程，博士学位（硕博连读）
科研项目
(1) 国家自然科学基金面上项目，“基于复杂形状离散元/有限元的砂卵地层盾构仿真方法与实验研究”(51878184) 2019-2022，主持.
(2) 国家自然科学基金青年基金项目，“基于离散元/有限元耦合的高压辊磨粉碎仿真方法与实验研究”(51404209) 2015-2017，主持.
(3) 湖南省教育厅优秀青年项目, “基于DEM/FEM的汽车夹层玻璃冲击破坏特性研究”(16B259),2016-2019, 主持.
(4) 广东工业大学青年教师种子基金,“基于DEM/FEM的砂卵石地层盾构刀具失效机理仿真方法基础研究”, 2017-2019, 主持.
(5) 国家自然科学基金青年基金,“不确定条件下脆性材料离散元模型参量的计算反求方法研究”(11602212),2017-2019, 参与, 第2.
(6) 广东工业大学校智慧医疗创新中心，“人车碰撞事故再现与头、颈损伤研究”(ZYZX22026) 2022-2023，主持.
(7) 企业项目，振动筛结构有限元分析，2022-2022，主持.
(8) 企业项目，立体库堆垛机设计与开发, 2023-2023, 主持.
(9) 企业项目，POT便携式光学硬度测试仪设计与开发, 2023-2024, 主持.
(10) 企业项目，飞机损伤智能检测系统设计与开发, 2025-2028, 主持.
部分学术成果
(1)Gao Wei*, Bin Liu, Jie Hu, et al. Numerical investigation on the fragmentation behaviour of hard rock with a pre-existing crack under TBM cutter using cohesive zone model, Engineering Fracture Mechanics, 2025, 318:110943. (SCI/EI, 中科院大类2区，TOP期刊)
(2)Gao Wei*, Feng YT*. A coupled isogeometric/super-ellipsoid discrete element method for the irregular particle-structure contact interaction based on support point approach. Computational Mechanics, 2026, 77:467-483. (SCI/EI, 中科院大类2区、TOP期刊)
(3)Gao Wei*, Liao Cheng, Zhang Licheng, et al. Behaviour of concrete-filled steel tube subjected to truck impact considering failure with cohesive zone model[J], Thin-Walled Structures, 2026, 225：114745. (SCI/EI, 中科院大类2区、TOP期刊)
(4)Gao Wei*, Matsunaga Takuya, Duan Guangtao, Koshizuka Seiichi. A coupled 3D isogeometric/least-square MPS approach for modeling fluid-structure interactions, Computer Methods in Applied Mechanics and Engineering, 2021, 373: 113538. (SCI/EI, IF 6.756, 中科院一区、TOP 期刊，领域顶刊)
(5)Gao Wei*, Zhang Licheng, Xiao Jinlun, Wen Hao, Xuejun Zheng*, A novel hydro-mechanically coupled cohesive zone model for hydraulic fracturing of pressure-dependent rocks[J], Rock Mechanics and Rock Engineering, 2025, https://doi.org/10.1007/s00603-025-05085-4. (SCI/EI, 中科院大类1区、TOP期刊)
(6)Gao Wei*, Wang Jiawen, Yin Shuohui, Feng YT. A coupled 3D isogeometric and discrete element approach for modelling interactions between structures and granular matters, Computer Methods in Applied Mechanics and Engineering, 2019, 354: 441-463. (SCI/EI, IF 5.763, 中科院一区、TOP 期刊，领域顶刊)
(7)Gao Wei*, Wang Jiawen, He Xiaoqiang, et al. Modeling the mechanical behavior of a helmeted headform impacted with a laminated windshield with consideration of composite failure[J]. Composite Structures, 2022, 279: 114787. (SCI/EI, 中科院大类一区、TOP 期刊)
(8)Gao Wei, Runhao Wang, Shunhua Chen*, Mengyan Zang. An intrinsic cohesive zone approach for impact failure of windshield laminated glass subjected to a pedestrian headform, International Journal of Impact Engineering, 2019, 126:147-159. (SCI/EI, 中科院大类一区、TOP 期刊)
(9)Gao Wei*, Liu B, Li J, et al. Effects of the structural properties of down-the-hole drill bits on the fracture behaviour of rock during rotary-percussive drilling[J]. Computers and Geotechnics, 2024, 176: 106763. (SCI/EI, 中科院大类一区、TOP 期刊)
(10)Gao Wei*, Feng Y T, Wang C. A coupled isogeometric/multi-sphere discrete element approach for the contact interaction between irregular particles and structures[J]. Powder Technology, 2023, 430: 118971. (SCI/EI, 中科院大类一区、TOP期刊)
(11)Gao Wei, Zhao Guanhua, et al. A high-fidelity numerical approach for dummy head-windshield contact interactions[J]. International Journal of Impact Engineering, 2023, 176: 104560. (SCI/EI, 中科院大类二区)
(12)Wang Jiawen, Wang Runhao, Gao Wei*, Chen Shunhua*. Numerical investigation of impact injury of a human head during contact interaction with a windshield glazing considering mechanical failure. International Journal of Impact Engineering, 2020: 103577. (SCI/EI, 中科院大类一区、TOP期刊, 学生第一作者、第二作者)
(13)Gao Wei*, Meng Huayang, Wu Zhijian, Tan Yuanqiang, DEM investigation of the mixing behaviour of non-spherical particles in an industrial-scale double U-shaped ribbon mixer, Computational Particle Mechanics, 2025, https://doi.org/10.1007/s40571-025-00968-3. (SCI/EI, 中科院大类3区)
(14)Chen Shunhua, Mitsume Naoto, Bui Tinh Quoc, Gao Wei*, Tomonori Yamada, Mengyan Zang, Shinobu Yoshimura. Development of two intrinsic cohesive zone models for progressive interfacial cracking of laminated composites with matching and non-matching cohesive elements. Composite Structures, 2019: 111406. (SCI/EI, 中科院大类一区、TOP 期刊)
(15)Gao Wei*, Wen H, Cai Y, et al. Numerical evaluation of head and neck injuries of a skateboarder impacted with a laminated windshield, Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, 2025, https://10.1177/09544070251377109. (SCI/EI, 中科院大类4区)
(16)Gao Wei*, Xiang Jibang, Chen Shunhua, Yin Shuohui, Zang Mengyan, Zheng Xuejun*. Intrinsic cohesive modeling of impact fracture behavior of laminated glass, Materials & Design, 2017, 127:321-335. (SCI/EI, 中科院大类1区、TOP期刊)
(17)Gao Wei*, Liu Xin, Hu Jie, et al. A Novel Bilinear Constitutive Law for Cohesive Elements to Model the Fracture of Pressure-Dependent Rocks[J]. Rock Mechanics and Rock Engineering, 2022, 55(2): 521-540. (SCI/EI, 中科院1区, TOP期刊)
(18)Gao Wei, Liu Xin, Chen Shunhua*, Bui Tinh Quoc, Yoshimura Shinobu. A cohesive zone based DE/FE coupling approach for interfacial debonding analysis of laminated glass. Theoretical and Applied Fracture Mechanics, 2020: 102668. (SCI/EI, 中科院大类2区)
(19)Gao Wei*, He X, Wang J, et al. Numerical investigation of oblique impact behavior of a helmeted headform on a windshield considering failure[J]. Thin-Walled Structures, 2022, 171: 108722. (SCI/EI, 中科院大类2区)
(20)Gao Wei*, Liu Lei, Liao Zechu, Chen Shunhua, Zang Mengyan, Tan Yuanqiang. Discrete element analysis of the particle mixing performance in a ribbon mixer with a double U-shaped vessel, Granular Matter, 2019, Granular Matter, 2019, 21(1):12. (SCI/EI, 中科院大类2区)
(21)Gao Wei*, Feng YT*. A coupled 3D discrete elements/isogeometric method for particle/structure interaction problems, Computational Particle Mechanics, 2020, 7: 869–880. (SCI/EI, 中科院大类3区)
(22)Gao Wei*, Tan Yuanqiang, Jiang Shengqiang, Zhang Gaofeng, Zang Mengyan. A virtual-surface contact algorithm for the interaction between FE and spherical DE. Finite Elements in Analysis and Design, 2016, 108:32-40. (SCI/EI, 中科院大类3区)
(23)Gao Wei*, Li Jian, Feng YT*, et al. Numerical investigation of impact fracture behaviors of rocks under confining pressure, International Journal of Fracture, , 2024, 245(1): 37-56. (SCI/EI, 中科院大类3区)
(24)Chen Hu, Zhang YX*, Zhu Linpei, Xiong Fei, Liu Jing, Gao Wei*. A particle-based cohesive crack model for brittle fracture problems[J]. Materials, 2020, 13(16): 3573.
(25)Gao Wei, Zang Mengyan*. The simulation of laminated glass beam impact problem by developing fracture model of spherical DEM. Engineering Analysis with Boundary Elements, 2014, 42:2-7. (SCI/EI, 中科院大类3区)
(26)Gao Wei, Zang Mengyan*, Xu Wei. An approach to freely combining 3D discrete and finite element methods. International Journal of Computational Methods, 2014, 11(1):1350051. (SCI/EI)
(27)Gao Wei, Tan Yuanqiang, Zang Mengyan. A Cubic Arranged Spherical Discrete Element Model. International Journal of Computational Methods, 2014, 11(5): 1350102. (SCI/EI)
(28)Feng YT*, Gao Wei*. On the strain energy distribution of two elastic solids under smooth contact[J]. Powder Technology, 2021, 389: 376-382. (SCI/EI, 中科院大类1区、TOP期刊)
(29)Zang Mengyan, Gao Wei, Lei Zhou. A contact algorithm for 3D discrete and finite element contact problems based on penalty function method. Computational Mechanics, 2011, 48(5):541-550. (SCI/EI, 中科院大类2区)
(30)Xu Wei, Zang Mengyan, Gao Wei. Adaptive Combined DE/FE Algorithm for Brittle Fracture of Plane Stress Problems, Computational Mechanics, 2014, 54(2):535-546. (SCI/EI, 中科院大类2区)
(31)张立成, 高伟*, 杨顶, 姜胜强. 节理特征对含U形孔岩石断裂特性的影响. 湘潭大学学报(自然科学版). 2025, 47 (06):98-111.
(32)臧孟炎, 雷周, 高伟, 陈虎，余洁冰. 显式离散元与有限元耦合软件V1.0. 计算机软件著作权. 登记号： 2011SR057163. 国家版权局, 2011.
(33)高伟, 刘磊, 王润豪, 向纪邦, 廖泽楚, 聂松辉, 郑学军. 一种可分离为抬式/推式担架的多功能轮椅, 专利授权号: ZL 2017 1 0095005.0. 发明专利, 国家知识产权局, 2018.
(34)高伟, 杨顶, 刘鑫, 何小强. 一种多功能水果采摘装置, 专利授权号: ZL202010875873.2, 发明专利, 国家知识产权局, 2022.
(35)高伟, 曾昆, 辜伟佳. 一种多功能轮椅及其平衡自调剂装置, 专利授权号: ZL202011603535.X, 发明专利, 国家知识产权局, 2022.
通信地址
办公地点：广东工业大学工学2号楼
通信地址：广州大学城外环西路100号
邮政编码：510006
Email: gaowei@gdut.edu.cn;hbweigao@126.com
