主要论文 |
l 期刊论文 [1] Zhaoyan Li, Xiaozhu Xie*, Qing Lai, Jiale He, Qinglei Ren. Laser Three-Dimensional incremental Multi-Routine interval scanning for quantitative removal of CFRP: Defect Analysis, ablation mechanism and strategy optimization [J]. Optics and Laser Technology, 2024, 176:110919 （SCI/EI收录,中科院二区, TOP期刊） [2] Zhaoyan Li, Xiaozhu Xie*, Yuhang Luo, Yajun Huang, Jiageng Yang, Huaibin Qing, and Tao Zhou, Cost-effective fabrication of a high-conductivity copper electrode for heterojunction solar cells via laser-induced selective metallization [J]. Optics Express, 2024, 32(7):12941-12949 (SCI/EI收录,中科院二区, TOP期刊) [3] Xiaozhu Xie*, Yingming Zheng, Haiqing Liao, Zuo Cao, Yajun Huang, Jiangyou Long. Ultrafast laser preparation of gas-liquid partitioned microgroove wicks to enhance heat transfer in ultrathin vapor chambers [J]. International Journal of Heat and Mass Transfer, 2024, 224 :125317 (SCI/EI收录，中科院二区，TOP期刊) [4] Jiangyou Long *, Ziyin Liu, Zuo Cao, Junwei Wu, Xiaozhu Xie*. Highly efficient pool boiling heat transfer on surfaces with zoned rose-petal-inspired hierarchical structures [J]. Applied Thermal Engineering, 2024, 241:122330 (SCI/EI收录，中科院二区，TOP期刊) [5] Yuhang Luo, Xiaozhu Xie*, Zucheng Zhang, Zhaoyan Li, Yajun Huang. Ultrafast laser composite cutting ultra-thin glass [J]. Optics Communications. 2024, 555:130224 (SCI/EI收录，中科院三区) [6] Ya-Jun Huang, Xiao-Zhu Xie*, Yu-Hang Luo, Zhao-Yan Li , Jia-Qi Cui , Jiang-You Long. Elucidation of the visualization process and its influencing factors for the preparation of microcircuits based on arc-beam laser-induced forward transfer [J]. Journal of Materials Processing Technology. 2023, 322:18200 (SCI/EI收录，中科院二区，TOP期刊) [7] Zuo Cao, Xiaozhu Xie*, Yingming Zheng, Ziqing Ouyang, Haiqing Liao, Jiangyou Long. Effect of thermal contact resistance on the CHF and HTC for pool boiling heat transfer [J]. Applied Thermal Engineering, 2023,229:120623 (SCI/EI收录，中科院二区，TOP期刊) [8] Jiangyou Long *, Junwei Wu a, Yujun Zhou a, Xiaozhu Xie. Hydrophilicity degradation and steam-induced rewetting during capillary-fed boiling [J]. Experimental Thermal and Fluid Science, 2024, 150:111030 (SCI/EI收录，中科院二区，TOP期刊) [9] Ya-jun Huang, Xiao-zhu Xie*, Jia-qi Cui, Jiang-you Long. Fabrication of high-performance copper circuits using laser-induced forward transfer with large receiving gaps based on beam modulation technology [J]. Journal of Manufacturing Processes,2023,87:54-64 （SCI/EI收录,中科院一区，TOP期刊） [10] Yuliang Zhang, Xiaozhu Xie*, Yaoan Huang, Wei Hu, Jiangyou Long. Internal modified structure of silicon carbide prepared by ultrafast laser for wafer slicing[J]. Ceramics International, 2023, 49: 5249-5260.（SCI/EI收录,中科院二区，TOP期刊） [11] 崔佳琪#，谢小柱*，黄亚军，李兆艳，罗宇航，龙江游。窄脉宽激光诱导背向选择性去除金属薄膜制备微电路[J]，光子学报，2023，52（7）：0752306 （EI收录） [12] 张炜#，刘涛，何家乐，张家发，张宇梁，龙江游，谢小柱*。飞秒激光全划切超薄碳化硅基片[J]，表面技术，2023，52（1）:306313（EI收录） [13] Xiaozhu Xie#*, Deyi Ou, Dianhe Ma, Jiale He, Hsinhan Peng. High‑quality laser processing of fused silica with bursts of ultrafast pulses[J]. Applied Physics A, 2022,128:1062.( SCI/EI收录，中科院四区) [14] Jianqiang Chen, Xiaozhu Xie*, Qingfa Peng, Ziyu He, Wei Hu, Qinglei Ren, Jiangyou Long. Effect of surface roughness on femtosecond laser ablation of 4H-SiC substrates[J]. Journal of Central South University, 2022, 29: 3294－3303.（SCI/EI收录,中科院二区） [15] Ziqing Ouyang, Jiangyou Long, Junwei Wu, Jinghao Lin, Xiaozhu Xie, Guibin Tan, Xiaohong Yi. Preparation of high-quality three-dimensional microstructures on polymethyl methacrylate surfaces by femtosecond laser micromachining and thermal-induced micro-leveling[J]. Optics & Laser Technology, 2022, 145: 107499.（SCI/EI收录,中科院二区，TOP期刊） [16] Wenjie Wu, Xiaozhu Xie*, Chao Shen, Jiangyou Long, Qinglei Ren, Wei Hu. Enhancement of adhesion and antibending performance of ag circuit on polyimide fabricated by heat-assisted direct ink writing method[J]. Physica Status Solidi (A), 2022, 219(19): 2200080.（SCI/EI收录,中科院四区） [17] Xiaozhu Xie#*, Wenjie Wu, Jincheng Xiao, Qinglei Ren. Fabrication of high sensitivity and stable strain sensors based on composite folded structures via embedded 3D printing[J]. Smart Materials and Structures, 2022, 31(9): 095027.（SCI/EI收录,中科院三区, TOP期刊） [18] Ziyu He, Xiaozhu Xie*, Jiangyou Long, Tao Liu, Zucheng Zhang, Qing Lai. Large-area regular periodic surface structures on 4H-SiC induced by defocused femtosecond laser[J]. Semiconductor Science and Technology, 2022, 37(9): 095005.（SCI/EI收录,中科院四区） [19] Yajun Huang, Xiaozhu Xie*. Jiaqi Cui, Wenqian Zhou, Jianqiang Chen, Jiangyou Long, Robust metallic micropatterns fabricated on quartz glass surfaces by femtosecond laser-induced selective metallization [J], Optics Express, 2022,30(11):19544 (SCI/EI收录,中科院二区, TOP期刊) [20] Jiangyou Long*, Ziyin Liu, Huipeng Lin, Yan Li, Zuo Cao, Zucheng Zhang, Xiaozhu Xie*. Pool boiling heat transfer and bubble dynamics over V-shaped microchannels and micropyramids: Does high aspect ratio always benefit boiling? [J], Applied Thermal Engineering, 2022, 201: 117796 (SCI/EI收录，中科院二区，TOP期刊) [21] Jinghao Lin, Yuexing Ouyang, Lan Chen, Kai Wen, Yan Li, Haoze Mu, Qinglei Ren, Xiaozhu Xie, Jiangyou Long, Enhancing the solar absorption capacity of expanded graphite-paraffin wax composite phase change materials by introducing carbon[J], Surfaces and Interfaces, 2022, 30:101871 (SCI/EI收录，中科院二区) [22] Jiangyou Long, Yuxin Li , Matthew H. Eliceiri, Qing Lai, Junwei Wu, Xin Zhao*, Costas P. Grigoropoulos, Xiaozhu Xie*, In-situ enhanced laser absorption in aqueous transition metal salt solution enables high-quality backside wet etching of optical glass by near-infrared lasers[J], Journal of Materials Processing Technology, 2022, 203:117507 (SCI/EI收录，中科院二区，TOP期刊) [23] Jiangyou Long*, Pingchuan Chu, Yan Li, Jinghao Lin, Zuo Cao, Meifang Xu, Qinglei Ren, Xiaozhu Xie*. Dual-scale porous/grooved microstructures prepared by nanosecond laser surface texturing for high-performance vapor chambers[J]. Journal of Manufacturing Processes, 2022, 73: 914-923(SCI/EI收录，中科院一区，TOP期刊) [24] Jiangyou Long, Ziyu He, Deyi Ou, Yajun Huang, Pengchao Wang, Qinglei Ren, Xiaozhu Xie*. Formation of dense nanostructures on femtosecond laser-processed silicon carbide surfaces[J]. Surfaces and Interfaces, 2022, 28: 101624(SCI/EI收录，中科院二区) [25] 谢小柱#*，欧德亿，刘涛，何家乐，胡伟，龙江游，激光加工过程中声发射检测技术的研究进展，航空制造技术[J]，2022, 65(23/24): 98–109 (中文核心) [26] Jiangyou Long#, Qingfa Peng, Gaopan Chen, Yuliang Zhang, Xiaozhu Xie*, Guoshun Pan*, Xiaofeng Wang. Centimeter-scale low-damage micromachining on single-crystal 4H–SiC substrates using a femtosecond laser with square-shaped Flat-Top focus spots[J]. Ceramics International, 2021, 47(16): 23134-23143 (SCI/EI收录，中科院二区，TOP期刊) [27] Yajun Huang, Xiaozhu Xie*, Miaoni Li, Meifang Xu, and Jiangyou Long. Copper circuits fabricated on flexible polymer substrates by a high repetition rate femtosecond laser-induced selective local reduction of copper oxide nanoparticles[J]. Optics Express, 2021,29(3 / 1):4453-4463 (SCI/EI收录，中科院二区，TOP期刊) [28] Xiaozhu Xie#*, Qingfa Peng, Gaopan Chen, Jianguo Li, Jiangyou Long, Guoshun Pan. Femtosecond laser modification of silicon carbide substrates and its influence on CMP process [J]. Ceramics International, 2021, 47(10), Part A:13322-13330 (SCI/EI收录，中科院二区， TOP期刊) [29] Xiaozhu Xie #*, Yuliang Zhang, Qingpeng Huang, Yajun Huang, Wei Zhang, Jiafa Zhang, Jiangyou Long. Monitoring method for femtosecond laser modification of silicon carbide via acoustic emission techniques[J]. Journal of Materials Processing Technology, 2021, 290 :116900 (SCI/EI收录，中科院二区，TOP期刊) [30] Jiangyou Long#*, Matthew H. Eliceiri, Letian Wang, Zacharias Vangelatos, Yuexing Ouyang, Xiaozhu Xie, Yongkang Zhang, Costas P. Grigoropoulos*. Capturing the final stage of the collapse of cavitation bubbles generated during nanosecond laser ablation of submerged targets[J], Optics and Laser Technology, 2021,134 :106647 (SCI/EI收录，中科院二区，TOP期刊) [31] Zuo Cao#, Ziqing Ouyang, Ziyin Liu, Yan Li, Yuexing Ouyang, Jinghao Lin, Xiaozhu Xie, Jiangyou Long*. Effects of surface oxides and nanostructures on the spontaneous wettability transition of laser-textured copper surfaces[J]. Applied Surface Science, 2021, 560:150021 (SCI/EI收录，中科院二区，TOP期刊) [32] Jiangyou Long#*, Matthew H. Eliceiri, Yuexing Ouyang, Yongkang Zhang, Xiaozhu Xie, Costas P. Grigoropoulos*. Effects of immersion depth on the dynamics of cavitation bubbles generated during ns laser ablation of submerged targets[J]. Optics and Lasers in Engineering, 2021,137:106334 (SCI/EI收录，中科院二区，TOP期刊) [33] Gaopan Chen#, Jianguo Li#, Jiangyou Long, Haimei Luo, Yan Zhou, Xiaozhu Xie*, Guoshun Pan*. Surface modulation to enhance chemical mechanical polishing performance of sliced silicon carbide Si-face[J], Applied Surface Science, 2021,536:147963 (SCI/EI收录，中科院二区， TOP期刊) [34] 谢小柱#*，朱裔良，黄亚军，申超，彭清发，王鹏超，龙江游。飞秒激光无碎屑加工不锈钢血管支架[J]，机械工程学报，2021，57（5）：251-261 (EI收录) [35] 申超#，翁沛希，王子杰，武文杰，谢小柱*。激光直写柔性电路的研究进展[J]. 中国科学: 物理学 力学 天文学，2021，51（8）：084201 (EI收录) [36] Jiangyou Long, Peiyang Zhou, Yajun Huang, and Xiaozhu Xie*. Enhancing the long-term robustness of dropwise condensation on nanostructured superhydrophobic surfaces by introducing 3D conical microtextures prepared by femtosecond laser[J], Advanced Materials Interfaces, 2020, 2000997 (SCI/EI收录，中科院二区) [37] Jiangyou Long, Matthew Eliceiri, Zacharias Vangelatos, Yoonsoo Rho, Letian Wang, Zhengliang Su, Xiaozhu Xie, Yongkang Zhang, and Costas P. Grigoropoulos. Early dynamics of cavitation bubbles generated during ns laser ablation of submerged targets[J]. Optics Express, 2020,28(10 / 11):14301 (SCI/EI收录，中科院二区，TOP期刊) [38] Xiaozhu Xie#*, Qingpeng Huang, Jiangyou Long, Qinglei Ren, Wei Hu, Shuai Liu. A new monitoring method for metal rust removal states in pulsed laser derusting via acoustic emission techniques [J]. Journal of Materials Processing Technology, 2020, 275 :116321 (SCI/EI收录，中科院二区，TOP期刊) [39] 周培阳#，彭耀政，黄泽铭，欧阳紫晴，龙江游，谢小柱*，纳秒激光制备的超疏水表面及其液滴冲击性能[J]，中国激光，2020，47（4）：0402012 (EI收录) [40] 谢小柱#*，周彩霞，高勋银，任庆磊，胡伟，激光诱导背向湿式刻蚀过程中工作液体的研究[J]，激光技术，2020，44（1）：7-13 (中文核心) [41] Jiangyou Long, Jianguo Li, Miaoni Li, Xiaozhu Xie#. Fabrication of robust metallic micropatterns on glass surfaces by selective metallization in laser-induced porous surface structures[J], Surface & Coatings Technology, 2019, 374: 338–344 (SCI/EI收录，中科院二区，TOP期刊) [42] Zhijian He, Xiaozhu Xie*, Jiangyou Long. Antireflective copper surfaces fabricated by low-cost nanosecond lasers for efficient photothermal conversion and desalination[J], Journal of Laser Applications, 2019,31: 022506 (SCI/EI收录，中科院四区) [43] X. Z. Xie#*, W. J. Hong, J.Y. Long, X. Wei, W. Hu, Q.L. Ren. Laser processing high aspect ratio groove wick for improving the thermal performance of flat micro heat pipe[J], Journal of Laser Micro Nanoengineering, 2019, 14(1):59-65 (SCI/EI收录，中科院四区) [44] Xiaozhu Xie#*, Caixia Zhou, Xin Wei, Wei Hu and Qinglei Ren. Laser machining of transparent brittle materials: from machining strategies to applications[J], Opto-Electronic Advances, 2019, 2(1):180017 (SCI/EI收录，中科院一区，TOP期刊) [45] Jiangyou Long #, Qing Weng, Wenjie Hong, Zuo Cao, Peiyang Zhou, Xiaozhu Xie*, Fast water flow in laser micromachined microgrooves with nonuniform surface wettability[J], Experimental Thermal and Fluid Science, 2019, 103:9-17 (SCI/EI收录，中科院二区，TOP期刊) [46] Jiangyou Long #, Caixia Zhou, Zhouquan Cao, Xiaozhu Xie*, Wei Hu, Incubation effect during laser-induced backside wet etching of sapphire using high-repetition-rate near-infrared nanosecond lasers[J], Optics and Laser Technology, 2019, 109:61-70 (SCI/EI收录，中科院二区，TOP期刊) [47] Jiangyou Long#*, Zuo Cao, Chaohui Lin, Caixia Zhou, Zhijian He, Xiaozhu Xie*, Formation mechanism of hierarchical Micro- and nanostructures on copper induced by low-cost nanosecond lasers[J], Applied Surface Science, 2019, 464:412-421 (SCI/EI收录，中科院二区，TOP期刊) [48] 朱裔良#，谢小柱*，黄庆澎，胡伟，任庆磊，飞秒绿激光加工镁合金的研究[J]. 光电工程，2019，46（8）：180672 (中文核心) [49] Xiaozhu Xie#*, Qing Weng, Zhiqiang Luo, Jiangyou Long, Xin Wei, Thermal performance of the flat micro-heat pipe with the wettability gradient surface by laser fabrication[J], International Journal of Heat and Mass Transfer, 2018, 125:658-669 (SCI/EI收录，中科院二，TOP期刊) [50] Jiangyou Long#*, Zhijian He, Caixia Zhou, Xiaozhu Xie*, Zuo Cao, Peiyang Zhou, Yiliang Zhu, Wenjie Hong, Zhisheng Zhou, Hierarchical micro- and nanostructures induced by nanosecond laser on copper for superhydrophobicity, ultralow water adhesion and frost resistance[J], Materials and Design, 2018, 155:185-193 (SCI/EI收录，中科院二区，TOP期刊) [51] Jiangyou Long#*, Zhijian He, Peiyang Zhou, Xiaozhu Xie*, Caixia Zhou, Wenjie Hong, Wei Hu, Low-cost fabrication of large-area broccoli-like multiscale micro- and nanostructures for metallic super-hydrophobic surfaces with ultralow water adhesion and superior anti-frost ability[J], Advanced Materials Interfaces, 2018, 5(180035313) (SCI/EI收录，中科院三区) [52] W. Jiang #, X. Z. Xie*, X. Wei, W. Hu, Q. L. Ren, Z. S. Zou, High contrast patterning on glass substrates by 1064 nm pulsed laser irradiation[J], Optical Materials Express, 2017, 7(5):1565-1574 (SCI/EI收录，中科院三区) [53] Wei Jiang#, Xiaozhu Xie*, Ronghong Che, Xin Wei, Wei Hu, Qinglei Ren, Qing Weng, Pulsed green laser induced regular stripes on kerf sidewall of sapphire substrate[J], Journal of Laser Micro Nanoengineering, 2017, 12(1):45-49 (SCI/EI收录，中科院四区) [54] Xiaozhu Xie#*, Xiandong Huang, Wei Jiang, Xin Wei, Wei Hu, Qinglei Ren, Three dimensional material removal model of laser-induced backside wet etching of sapphire substrate with CuSO4 solutions[J], Optics and Laser Technology, 2017, 89:59-68 (SCI/EI收录，中科院二区，TOP期刊) [55] 罗志良#，谢小柱*, 魏昕, 胡伟, 任庆磊, 江伟，激光诱导背向湿式刻蚀蓝宝石过程中声发射信号检测试验[J]，中国激光，2017，44(04)：51~58 (EI收录) [56] 曹州权#，谢小柱*，陈蔚芳，魏昕，胡伟，任庆磊，液体辅助激光加工过程中压力检测及应用研究进展[J]，光电工程，2017，44(4)：381~392 [57] X. Z. Xie#*, Z. Q. Luo, X. Wei, F. L. Zhang, W. Hu, Q. L. Ren, Twin gas jet-assisted pulsed green laser scribing of sapphire substrate[J], Journal of Laser Micro Nanoengineering, 2016, 11(2):170-178 (SCI/EI收录，中科院四区) [58] Xin Wei#*, Xiangdong Yang, Xiaozhu Xie, Wei Hu, A material removal rate model-based chemical action of ultra-thin SUS304 substrate in chemical mechanical polishing[J], International Journal of Advanced Manufacturing Technology, 2016, 85(1-4):287-290 (SCI/EI收录，中科院三区) [59] 江伟#，谢小柱*，魏昕，胡伟，任庆磊，翁清，脉冲光纤激光控制断裂切割超薄钛酸锶陶瓷基片[J]，中国激光，2016，(05)：91~99 (EI收录) [60] 谢小柱#*, 车荣泓, 魏昕，胡伟，任庆磊. 红外脉冲激光诱导背面湿式刻蚀加工蓝宝石的工艺规律研究[J]. 应用激光, 2015，35（2）：236~241 [61] X. Z. Xie#*, M. F. Hu, W. F. Chen, X. Wei, W. Hu, X. Y. Gao, X. R. Yuan, M. H. Hong*, Cavitation bubble dynamics during laser wet etching of transparent sapphire substrates by 1064 nm laser irradiation[J], Journal of Laser Micro Nanoengineering, 2013, 8(3):259-265 (SCI/EI收录，中科院四区) [62] Xiaozhu Xie#*, Fumin Huang, Xin Wei, Wei Hu, Qinglei Ren, Xuerui Yuan, Modeling and optimization of pulsed green laser dicing of sapphire using response surface methodology[J], Optics and Laser Technology, 2013, 45:125-131(SCI/EI收录，中科院二区，TOP期刊) [63] 谢小柱#*，黄显东，陈蔚芳，魏昕，胡伟，车荣泓, 脉冲绿激光划切蓝宝石基片过程研究[J]，中国激光，2013，40（12）：1203010-1~9 (EI收录) [64] 谢小柱#*，苑学瑞，陈蔚芳，魏昕，胡伟，胡满凤，高勋银, 激光诱导泡技术研究和应用新进展[J], 激光与光电子学进展，2013，50（8）：080017-1~7 [65] X.Wei#*, X. Z. Xie, W. Hu, J. F. Huang, Polishing Sapphire Substrates by 355nm ultraviolet laser[J]. International Journal of Optics, 2012, 2012:1-7 (SCI/EI收录，中科院四区) [66] 黄福民#，谢小柱*，魏昕，胡伟，苑学瑞，半导体晶圆激光切割新技术[J]，激光技术，2012，36（3）：293~297 [67] X. Z. Xie#*, Z. Y. Pan, X. Wei, F. M. Huang, W. Hu, M. H. Hong*, Hybrid micromachining of transparent sapphire substrate by pulsed green laser irradiation[J], Journal of Laser Micro Nanoengineering, 2011, 6(3):209-213 (SCI/EI收录，中科院四区) [68] 谢小柱#*，魏昕，胡伟，CO2激光切割模切板的表面质量[J]，激光技术，2009，33（1）：71~73 [69] Xiao-zhu Xie#*, Li-jun Li, Xin Wei, Wei Hu, Distribution of the intensity absorbed by evaporative front in laser cutting nonmetallic material[J], Optics and Lasers in Engineering, 2008, 46(8):604-613 (SCI/EI收录，中科院二区，TOP期刊) [70] 谢小柱#*, 李力钧, 魏昕，胡伟. 有机玻璃激光气化切割前沿[J]，中国激光. 第35卷，第6期：925-930页，2008. (EI收录) [71] 谢小柱#*, 魏昕，胡伟. 线偏振CO2激光对非金属材料切缝的影响[J]. 激光技术，2008，32（4）：399~401 （中文核心） l 邀请报告 学术会议 [1] 谢小柱，基于光束调制技术的PCB开路激光微连接技术研究，2024全国先进焊接材料加工及特种连接技术交流会，海南三亚，2024年1月13-16日 [2] Xiaozhu Xie, Yajun Huang. Selective preparation of high-performance Cu metal micropatterns based on laser direct writing technology, CIOP2023，Xi`an, P.R. China, August 7-10th 2023 [3] 谢小柱，基于激光直写技术选择性制备高性能金感微图案的方法研究，第十五届全国激光加工学术会议，湖北武汉，2023年5月12-15日 [4] 谢小柱，超快激光剥离碳化硅晶锭机理研究，第十四届全国表面工程大会，湖北武汉，2023年4月21-25日 [5] 谢小柱，表面热功能结构的激光制备技术及应用，《中南大学学报（英文版）》激光加工及微纳技术学术研讨暨专刊发布会，湖南长沙（线上会议），2022年11月25-26日 [6] 谢小柱，超薄均热板的激光制造技术研究，智能制造与激光加工国际学术会议，广东韶关（线上会议），2022年11月25-26日 [7] 谢小柱，超快激光-化学机械抛光复合平坦化加工碳化硅技术研究。2021年中国光学学会学术大会，中国，深圳，2021年9月18-20日 [8] Xiaozhu Xie, Acoustic emission (AE) detection technology in laser micromachining, LPC2021, Virtual Conference, 7th March 2021 [9] 谢小柱，声发射技术在激光精密加工中的应用。第四届超快激光精密加工技术及应用研讨会，中国，杭州，2020年12月18-19日 [10] 谢小柱，激光加工硬脆透明材料进展。第十五届全国激光技术与光电子学学术会议（LTO2020），中国，上海，2020年10月17-20日 [11] X. Z. Xie, M. N. Li, J. Y. Long, J. G. Li, C. X. Zhou, Z. S. Zou. Laser-induced backside wet/dry etching microstructures on transparent and brittle materials, Proc. SPIE 11183, Advanced Laser Processing and Manufacturing III, 1118307 (19 November 2019) [12] Xiaozhu Xie，Laser structuring micro/nano surface and applications, LPC2019，Shanghai, P.R. China, March 21th 2019 [13] Xiaozhu Xie, Advanced laser processing technology and applications, 2018 International Symposium on Laser Advanced Manufacturing (SALM2018), Wuhan, P.R. China, 14 November 2018 [14] 谢小柱，激光先进制造技术在摩托车行业的应用与思考，ALAT 2018中国先进激光在摩托车应用技术大会，中国，江门，2018年9月14日 [15] Xiaozhu Xie, Laser induced backside wet etching of sapphire substrate, The 12th Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR2017), Singapore, 31 July-4 August 2017 [16] 谢小柱，难加工材料的激光加工技术应用, 2016华南（广州）先进激光及加工应用技术论坛, 中国，广州，2016年12月7-9日 [17] 谢小柱. 激光加工蓝宝石的技术及应用，亚洲激光论坛（ALAT2015），中国深圳, 2015年5月8-9 日 教学会议 [1] 谢小柱，科产教融合的激光加工实训，全国激光技术教育交流研讨会暨雷宇激光新品发布会，中国东莞，2024年1月6日 [2] 谢小柱，守正创新面向未来培养高素质工程创新人才，2023年中南地区港澳特区金工研究会工作会议，广西桂林，2023年7月7至10日 [3] 谢小柱，守正创新面向未来培养高素质工程创新人才，基于赛课融合的工程实践创新人才培养暨广东省工程实践创新能力大赛解析会议，广东广州，2023年7月1至3日 l 会议论文 [1] Xiaozhu Xie*, Yajun Huang. Selective preparation of high-performance Cu metal micropatterns based on laser direct writing technology[C], Proc. SPIE 12935, Fourteenth International Conference on Information Optics and Photonics (CIOP 2023), 129351K (24 November 2023) (EI/ISTP收录) [2] X. Z. Xie, M. N. Li, J. Y. Long, J. G. Li, C. X. Zhou, Z. S. Zou. Laser-induced backside wet/dry etching microstructures on transparent and brittle materials[C], Proc. SPIE 11183, Advanced Laser Processing and Manufacturing III, 1118307 (19 November 2019) (EI/ISTP收录) [3] Yiliang Zhu#, Xiaozhu Xie*, Qingpeng Huang, Wei Hu, Research progress in laser processing of vascular stent[C], Proceedings of SPIE, Sixth International Conference on Optical and Photonic Engineering, 2018, 10827, Shanghai, P.R. China, 2018.5.8-5.11 (EI/ISTP收录) [4] Qing Weng#, Xiaozhu Xie*, Ronghong Che, Xin Wei, Wei Hu, Qinglei Ren: Study on copper surface wetting transformation by UV laser fabrication[C], Proceedings of LPM2017 - the 18th International Symposium on Laser Precision Microfabrication, 2017, Toyama, Japan, 2017.6.5-6.8 [5] M. Tang#, X. Z. Xie, J. Yang, Z. C. Chen, L. Xu, Y. S. Choo, M.H. Hong*, Laser microprocessing and nanoengineering of large-area functional micro/nanostructures[C], Proceedings of SPIE - Smart Nano-Micro Materials and Devices, pp820428, Hawthorn, 2011.12.05-07. (EI/ISTP收录) [6] Xiaozhu Xie#*, Fumin Huang, Xin Wei, Wei Hu, Qinglei Ren, Xuerui Yuan, Ablation threshold of sapphire by pulsed green laser in nanosecond regime[C], Advanced Materials Research, 2011, 314-316: 1930-1934 (EI/ISTP收录) [7] Xie Xiao-zhu#*, Huang Fu-min, Wei Xin, Hu Wei, Ren Qing-lei, Experimental study of laser dicing sapphire substrate by green DPSS laser[C], Proceedings of SPIE - Semiconductor Lasers and Applications IV, pp78440T, Beijing, 2010.10.18-19 (EI/ISTP收录) [8] Wei X. #*, Xie X. Z., Huang J. F, Hu W., Experimental study on polishing sapphire substrate by Q-switched 355nm laser with nanosecond pulses[C], Proceedings of the 9th International Conference on Frontiers of Design and Manufacturing, Changsha, 2010.07.17-19 [9] X.Z. Xie#*, J.G. Lu, X. Wei, W. Hu, Influence of beam polarizations on evaporative laser cutting nonmetallic materials within high absorptance[C], Materials Science Forum, 2009, 626-627:363-368. (EI/ISTP收录) [10] XIE Xiao-zhu, LI Li-jun, WEI Xin, HU Wei. Mechanism of CO2 laser cutting nonmetallic materials based on wall focusing effects[C]. SPIE, 2008, 68258 (EI/ISTP收录) [11] 曹佐#，谢小柱*，龙江游，纳秒激光制备双尺度吸液芯结构均热板及其传热性能，第13次全国热处理大会暨热处理学会成立60周年报告会，2023，中国，合肥，2023.8.18-8.20 [12] 崔佳琪#，谢小柱*，基于光束整形技术的纳秒激光诱导背向选择性烧蚀Cu薄膜制备高质量微图案结构，第十五届全国激光加工学术会议，2023，中国，武汉， 2023.5.12-5.15 (优秀学生报告奖) [13] 黄耀安#，谢小柱*，表面粗糙度对飞秒激光烧蚀4H-SiC的影响规律研究，第十五届全国激光加工学术会议，2023，中国，武汉， 2023.5.12-5.15 [14] 赖庆#，谢小柱*，飞秒激光选择性烧蚀在CFRP修复中的应用研究，第十五届全国激光加工学术会议，2023，中国，武汉， 2023.5.12-5.15 [15] 曹佐#，谢小柱*，何梓裕，飞秒激光在4H-SiC表面大面积诱导规则的周期性结构，第十五届全国激光加工学术会议，2023，中国，武汉， 2023.5.12-5.15 [16] 黄亚军#，龙江游，谢小柱*，基于光束调制技术的激光诱导向前转移制备微电路的研究，第七届激光先进制造技术应用研讨会, 2023，中国，北京，2023.4.7-4.9日 (优秀学生报告奖) [17] 曹佐，谢小柱*等，脉冲激光织构金属表面的自发浸润性转变及其对池沸腾性能的影响，2021年中国光学学会学术大会，2021，深圳，中国，2021.9.18-9.20 (优秀学生报告奖)。 [18] 张祖铖，谢小柱*等，超快激光脉冲串加工透明脆性材料的机理及其工艺研究，2021年中国光学学会学术大会，2021，深圳，中国，2021.9.18-9.20 [19] 黄亚军，谢小柱*等，基于飞秒激光诱导背向干式刻蚀技术在石英玻璃表面制备金属微图案，第五届微纳光学技术与应用交流会，2021，广州，中国，2021.9.10-9.12 [20] 陈建锵，谢小柱*等，表面粗糙度对飞秒激光烧蚀4H-SiC的影响规律研究，第五届微纳光学技术与应用交流会，2021，广州，中国，2021.9.10-9.12 [21] 黄亚军，谢小柱*等，飞秒激光诱导制备Cu电路的CuO纳米油墨配制与表征，第十四届全国激光加工学术会议，2020，广州，中国，2020.11.5-11.7 (优秀学生报告奖)。 [22] 张炜，谢小柱*等，飞秒激光加工石英玻璃的机理研究，第十四届全国激光加工学术会议，2020，广州，中国，2020.11.5-11.7 [23] 马典贺，谢小柱*等，超快激光隐形切割石英玻璃的工艺研究，第十四届全国激光加工学术会议，2020，广州，中国，2020.11.5-11.7 [24] 黄庆澎#，谢小柱* 等, 纳秒脉冲激光除锈过程的声发射监测实验研究，第十三届全国激光加工学术会议暨第二届激光复合制造协同创新国际论坛，2018，中国，杭州， 2018.11.8-11.9 [25] 李俭国#，谢小柱*，激光活化玻璃表面的铜电路选择性沉积，杭州，第十三届全国激光加工学术会议暨第二届激光复合制造协同创新国际论坛，2018，中国，杭州， 2018.11.8-11.9 [26] 李苗妮#，谢小柱*，激光诱导还原烧结氧化铜纳米颗粒制备铜电路，第十三届全国激光加工学术会议暨第二届激光复合制造协同创新国际论坛，2018，中国，杭州， 2018.11.8-11.9 |
